How to make hair ties with your own hands?

At the moment, long-haired girls are increasingly wondering how to sew a hair elastic. In such a situation, women use various devices, including hair ties.

Homemade hair bands will always be distinguished by their originality.

Women either buy gum or make them on their own - option 2 is more attractive. Hair tie consists of various scrap materials: fabrics, ribbons, knitting yarns, etc.

At the moment, women use different ways to create rubber bands - as a result, each girl can sew beautiful hair ties with her own hands.

This article describes how to make a hair tie, as well as the popular rubbers for hair.

Hair tie - standard product

When creating the basis for the headband gum girl uses such materials:

In the manufacture of basics for rubber hair woman performs the following actions:

  • a needle
  • scissors
  • thread, suitable for the color of the fabric,
  • a piece of cloth that is 3 times longer than the rubber, the width is any,
  • clothes elastic (20 cm),
  • picks up a prepared piece of cloth, folds it along — in half, and sews it along the edges,
  • then it folds the stitched piece with holes - one on the other - and stitches its edges. In this case, the girl leaves a hole through which she then turns out to cut,
  • reverses the cut and inserts into it the elastic from the linen,
  • tying a rubber thread and stitching a hole - and the base is ready!
  • Scrunchies for hair do it yourself: master classes with photos

    Hello! My friends, on the street, though not spring yet, but the time is not far off, when we all will walk without caps. It is necessary to take care of how your little head will look, especially if you have very long hair. That is why today we will make do-it-yourself hair ties!

    We will move, so to speak, from the most elementary to something more complicated. In any case, you will definitely cope with all types of these rubber bands, because I will describe in detail how to make each of them.

    In fact, there is just an incredibly huge amount of ideas for creating rezinochek (and not only). And almost every one of them can be realized with the help of simple manipulations. In general, a lot of hair accessories, I'll show you. Make yourself comfortable, I will open the door for you to the amazing (really!) World of hair accessories (no matter how strange it sounds :))

    Before you start, take a look here. When recharge your inspiration, come back))

    Making fashionable elastic fabric

    A lot of girls love to be in the spotlight. In this situation, women use fashionable rubber bands for hair.

    For the manufacture of catchy rezinochki for hair, a woman uses these materials:

    When creating a fashionable gum girl performs the following actions:

    Elegant crochet hook

    When going to a restaurant and other institutions, the girl uses an elegant elastic band for hair.

    In the manufacture of such a product a woman uses such materials:

    When creating an elegant rubber thread, the main thing is to tie the base properly. The result should be a volumetric stitch seam.

    While weaving a woman adds beads. Also, seamstresses add beads and after weaving - in a similar situation, the girls stretch the thread through the rubber band and hang it with beads.

    Beautiful children's elastics for girls with a flower

    In the manufacture of the gum “Flower-five-leaf” woman performs the following actions:

    These flowers are fixed on bandages for kids and girls. In this situation, the girl takes several circles of various sizes, cuts them along the edge and burns.

    At the end, the woman holds the circles in the center of the bead and the five-leafed flower is ready!

    Button happiness with ribbons

    If the girl has in stock original buttons that do not fit the clothes, but they can also be used! In such a situation, a woman takes a rubber thread, a button and sews a rubber button.

    If the buttons are small and the base is wide, then the girl makes a beautiful button decor. In this situation, a woman can use various female devices: ribbons, rhinestones, etc.

    The basis of the hair tie or the simplest model

    In order to make a foundation, you first need:

    • underwear or just a thin elastic band (15-20 cm),
    • a piece of cloth (about 2 to 3 times longer than the gum length, arbitrary width),
    • thread in the color of the fabric,
    • needle,
    • pin,
    • scissors.

    Take the prepared piece of fabric, fold it along in half, sew around the edge. Then fold the stitched piece with the holes to each other and sew along the edge, leaving a hole for turning out. Remove the workpiece.

    And now insert a linen elastic. Tie it, sew a hole. That's all. Such a model can be used as an independent product or as a basis for a more sophisticated gum.

    Scrunchy hair with his hands: workshops and photos

    How much you can make rezinochek, you just can not imagine! Now look at the options for gum, which can be done, even without possessing serious knowledge of sewing art.

    Four variations

    To plunge into creativity with your head right away, I suggest you look at these four options rezinochek. Each of them you can somehow find in my articles about homemade gifts. At the end of the article I just give links to those workshops.

    In short: bows are made with multiple additions. In the first case, several tapes are folded, and in the second, folds are formed from a single strip. Flowers are collected from a strongly gathered tape glued to a circle-basis. In the latter case, the bow is also placed on top.

    Here's another version of the bow:

    Beautiful and fashionable

    Very often I see such a model. Want to be the center of attention? Then make this beautiful and catchy hair tie. Prepare a piece of cloth, wire, warp and thread with scissors.

    From the fabric, cut two ovals, which sew together along the edge, leaving a hole. Insert the wire there. Place the future bow in a rubber band and tie it up.

    Elegant

    This accessory is not ashamed to wear an evening. For her, prepare the base, brilliant (optional) yarn, all sorts of beads and a crochet hook (although if the yarn is thick enough, you can handle it with your hands).

    The most important thing here is how to tie the foundation. I do not know how this type of strapping is properly called, but he reminded me of a voluminous stitched seam. In the course of weaving, gradually add beads (this can be done later, by stretching the thread through the elastic band, gradually stringing them on it).

    Baby gum for little girls

    A five-leaf flower can be created by a simple operation: take a circle, sweep it along the edge, tighten it and fill it. At the end you sew up and make several utyazhka from the center.

    These flowers love to fasten dressings to newborns and generally small children. Take a few circles of different sizes, make them cuts along the edge and burn. It remains only to fasten in the center of the bead.

    Button happiness

    There are several original buttons that are definitely not useful for clothing, but do not give rest to your creative start? Then let them go! Everything is easy: take a rubber button and sew one to the other. If the buttons are small and the base is wide, then you can simply make a button decor.

    All sorts of additional decorations are welcome: ribbons, rhinestones, etc.

    Lace Gum

    The rubber can be sewn as well as the base for the rubber, but with one difference: the fabric can not be turned out after sewing. With the help of lace is obtained very light and playful image

    The second option is with lace: this time only a flower is made of this wonderful material, and not the whole gum. To do this, it is enough to collate the lace and sew it in the center, the rest is a matter of decor.

    Gum "Bow"

    Elastic band with a bow can be sewn absolutely from any fabric! I decided to experiment with fur

    Below, I decided to show you how to make a bow. First, make the basis for the elastic band, and then for a bow, take a wide strip of fabric, sew it in half (as well as for the base).

    Then sew the ends of the bow, folding the blank again in half. Turning the gum and drag it in the center with a strip of fabric.

    It turns out this cuteness:

    From usual cotton fabric the following will turn out:

    Gum "Hare ears"

    Somehow I wandered into a free workshop within the framework of the BiblioTime project (I told about it here). The theme of the handicraft meeting was just rezinochki. But if everyone decorated the cut with beads, then I decided to distinguish myself, recalling the “eared” specimens.

    Unfortunately, I didn’t have pictures of that product, but I can quite tell you about creating a rubber band with ears

    To make such a rubber, you need a pattern:

    Again need a base for the gum. The ears are tied with a knot around it and a romantic and girlishly tender look is obtained. What you need for spring

    Gum "Jack" ("Halloween")

    I think many people watched Tim Burton's The Nightmare Before Christmas. As for me, the product is specific, but very vivid and memorable.
    Especially the main character is Jack Skellington, whom you see below.

    In general, it is not difficult to make an elastic band with it, for this you need only the usual thin hair tie, ribbons, accessories and fabric with markers for the face.

    First, you attach the fittings and bows of ribbons, and then the face itself (the usual circle of cloth, filled with padding polyester and painted). Of course, in the photo, Jack's face is made of polymer clay. But it’s easy to create from fabric

    Bunnies

    Absolutely children's option. You will need fabric and decorations. In this case, they may be felted from wool, but they can also be sewn from fabric, taking patterns from the existing muzzles.

    Photos of other gum DIY

    The approach here is quite simple. Many variations of hair accessory you have seen today, but plus to everything, I want to give you a small list where you will find even more inspiration for creating rubber bands:

    Each of these articles has patterns that you can use to create elastic bands.

    • Christmas trees
    • Monkeys
    • Hearts
    • Ribbon Flowers
    • Packing bows

    Here, for example, one of the flowers on my rubber band. By the way, at that time it was my first twisted rose.

    A lot of fun stuff can be made from felt. Somehow I'll do it at leisure. The benefit is very profitably ordered felt right here.

    Well, the article has come to an end. I hope you were inspired by the creative feats of all the rezinochki that were in this article

    See you soon! !

    Sincerely, Anastasia Skoreeva

    How to make a hair tie with your own hands

    Original hair ornaments are rubber bands that are made with your own hands. They will favorably emphasize your hairstyle and allow you to quickly collect curls in the tail or braid the braid. Thanks to the detailed master classes in this article, you will learn how to create beautiful hair ornaments.

    How to make a hair tie out of fabric

    New is well forgotten old. Gum fabric are becoming increasingly popular. It turns out that it is very easy to sew them; it is enough just to carry out each step in the instructions carefully.

    Prepare such materials:

    • billet in the form of a simple elastic band,
    • a strip of fabric measuring 90 cm by 10 cm.
    • needle and thread to match the material.

    • Fold a length of fabric along with its face inward. Take the gum in hand. The ends of the material clasp the workpiece from the inside.
    • Attach the thread to one of the corners of the strip. Begin stitching two opposite cuts, making small stitches.
    • Sew the entire length of fabric in this way.
    • For convenience, wrap a strip of folds on the inside of the gum.
    • When you completely sew the edges of the fabric, secure the thread with a bundle.
    • Slide your thumb under the material.
    • Gradually turn the fabric on the front side. At the same time help yourself with your fingers, but do not drastically pull the workpiece, as the seam may disperse.
    • You will have such a basis for the gum.
    • Wrap the edges of the cuts inwards and sew with a hidden stitch.
    • That's it, the rezinochka for hair from material is ready!

    How to make a hair tie of satin ribbon

    Another easy material for work is tape. They have finished edges, which means that the fabric will not disperse along the threads.

    • satin ribbons of different widths
    • scissors and a thick thread
    • button decor
    • a candle or a lighter,
    • glue gun,
    • ordinary gum.

    • Cut the widest tape to a length of 45 cm. Make tape slices at an oblique angle. Now, each of the next tape cut 2 cm shorter. All you need to prepare 5 ribbons for gum.

    Tip To prevent the ribbon sections from being disheveled, process them with a fire or a soldering iron.

    • Gather the ribbons together. Position them as the width of the fabric decreases. So you will have the widest bottom, and the narrowest - on top. Visually mark the middle of the longest strip and insert the thread.

    Tip If there is no twine in the color of the ribbons, then use the narrowest ribbon.

    • Pull the ribbons tight. Tie a thread tightly over several knots.
    • Turn the blank on the reverse side, draw the thread and tie the elastic to the central part of the bands.
    • Glue on top the decor. Do not use it too large, as it will look out of place on hanging ribbons.

    How to make a gum of thread

    Bulk hair bands will be obtained if they are knitted from thick threads. To create such an original elastic band, all you need is a hook and yarn.

    • Make the first loop on the thread. To do this, hook the thread into the loop and tighten it.
    • Dial 12 air loops. They will serve as the basis for all mating.
    • Pass the pigtail of threads through the elastic and connect its ends with a simple column.
    • Dial three air loops, then connect with the main part. Continue to tie up the gum columns. You can choose any other crochet pattern convenient for you.
    • The first row of work must be performed in a circle. In this case, link the last column together with the first.
    • Tie gum in a similar way along the entire length.
    • Finish work when knit up to the first row. Tie the edges together, make a knot and cut the thread.
    • This gum will definitely not be anyone!

    How to make a hair tie from fluffy wire

    If you can not knit or sew, then the following instructions for creating hair ties are for you. The base for the decoration will be the blue wire. It is often used for decorating bouquets.

    • fluffy pink and green wire,
    • blank - gum.

    • Take six pink blanks. Thread them through the gum, put them together.
    • In the central part of the wire, make one revolution around the axis. So you fix the decor on the elastic band.
    • Now start bending the ends of the wire in a spiral.
    • Twist it all the way to the center of the knot.
    • Prepare in this way all other parts. Twist the wire gradually and that which is located nearby.
    • As a result, you will get such a billet with round petals.
    • Form a rose bud. To do this, straighten the wire in a circle and slightly at an angle to the center of the flower.
    • Use green wire for leaves. Twist it on the back of the bud.
    • Twist the two ends in the same way as the petals.
    • The original fluffy wire gum is ready!

    Thanks to such detailed master classes, you can make your own hair jewelry. The main thing is to follow each step in the instructions.

    Another option to create a gum for hair from buttons, see the video:

    How to make kanzashi hair ties with your own hands?

    Before you sew a hair elastic in the form of a flower, you need to prepare the following materials:

    • cardboard,
    • scissors,
    • the cloth,
    • needle,
    • thread,
    • elastic,
    • bead.
    1. Cut out cardboard 3 circles of different diameters (5, 6.5 and 8 centimeters).
    2. We apply the circles to the fabric, circle and cut. It is necessary to cut out five circles of each diameter.
    3. Fold the circle in half.
    4. Once again, turn in half a semicircle.
    5. Petal stitch below the needle forward.
    6. Similarly, you need to collect on this thread another 5 petals. We shrink the resulting flower.
    7. In the same way we collect flowers from circles of a different diameter.
    8. Sew the flowers together so that the largest flower is at the bottom, the smallest is at the top.
    9. To a large flower sew gum.
    10. In the center of a small flower you can glue a bead or a beautiful pebble. Scrunchy ready.

    Scrunchy - flower: master class

    Before you make a hair tie, prepare the following:

    • thread
    • needle
    • the cloth,
    • small size suede
    • scissors,
    • rivet
    • gum
    • glue.
    1. Cut a thin strip of width no more than 5 cm from a piece of fabric. On the one hand it is necessary to make a pattern of future flower petals with scissors.
    2. We begin to gather a string of fabric by threading it.
    3. On the circumference of the suede mug we glue the flower blank.
    4. Take the rivet and glue it in the middle of the flower.
    5. Next we need to work with a rubber band. It is necessary to unpick it in one place not more than 1 cm in length.
    6. Glue on the back of the flower gum.
    7. Give the craft time to dry. Scrunchy in the form of a flower is ready.

    The process of creating rezinochki for hair

    To create jewelry will need:

    • scrunchy,
    • purple cabochon
    • scissors,
    • ruler,
    • ribbons from satin 25 mm wide, violet and lilac flowers,
    • thread and needle for handicrafts,
    • glue,
    • lighter.

    Fabric hair tie

    You can make an ordinary gum without flowers. This decoration is easier to make. Although it is time consuming. For this

  • sewing machine,
  • scissors,
  • elastic,
  • fabric size of 10 to 50 cm.
    1. We fold the two edges of the fabric from the inside and stitch along the edge on the sewing machine. The indent should be no more than 1 cm.
    2. Tuck the fabric in the middle and hold it in this position with your finger as shown in the photo below.
    3. Fold the remnants of the fabric inside. That is, we need to fold the strip of fabric in half.
    4. We start to stitch on the machine from the side of the sewn part along the edge. It is important to be careful not to sew the folds inside. As you sew, you need to get the inside of the fabric and continue to scribble on the typewriter.
    5. Three centimeters before the beginning of the line you need to leave a small hole. Later through it we will pass the gum.
    6. Turning the fabric on the front side.
    7. We pass inside the gum.
    8. Tie her up.
    9. Stitch the remaining hole on the machine so that the hair tie is completely stitched along the entire length.
    10. Straighten the gum. Thus, the hair ornament is ready.

    Creating hair ties is not only exciting, but also interesting. Such handmade jewelry will set you apart from the crowd, since no one else will have such an accessory.

    After all, this is an author's work.

    And the possibility of using different materials to create a hair tie will allow you to diversify your hairstyle: make a sloppy bunch, a regular tail or an elegant horse tail.

    Making jewelry

    • Work should begin with the manufacture of individual parts. From lilac and violet ribbons it is necessary to prepare 4 segments each, 16 cm long.
    • Having taken one piece of each color in your hands, you should fold their wrong sides together.
    • Having a purple detail on top, you need to connect the slices of double parts. It is important not to twist and turn the tape. The result is a long and narrow loop.
    • Continuing to hold the combined slices with your fingers, it is necessary to bend the upper part of the eyelet, folding the part in half.
    • In this state, the item must be secured with a pin. And immediately you need to prepare a second such detail, completely repeating each action.
    • The received two parts should be stitched manually with an ordinary needle with a threaded thread. Need to sew small stitches, trying to simultaneously capture all layers of the tape. In this case, both blanks must be stitched with one thread, without breaking it.
    • Next, the resulting line should be strongly tightened, collecting the edge of the tape in small folds. After that, you need to make a few fixed knots with a needle and cut off the excess thread.
    • Now, with the help of a lighter, carefully cut the tape slices carefully and carefully.
    • It turned out half the bow, now you need to do the second part, completely repeating the previous steps.
    • The resulting halves should be joined together, sticking together the stitching parts.
    • Now the purple ribbon should be twisted into a tube and with a glue wrap around the fastening point of the two halves of the bow.
    • From the seamy side in the center of the bow you need to attach the prepared gum.
    • It remains to supplement the middle of the bow with a purple cabochon and smooth the edges of the ribbons.

    Lush and beautiful bow is ready!

    Today, I will show you how to make a flower out of satin ribbon. You can decorate with this flower the same elastic for hair, hairpin, gift wrapping.

    To create rezinochki need:

    • glue gun,
    • light pink cabochon
    • scissors,
    • scrunchy,
    • a circle of felt
    • a satin ribbon not exceeding 25 mm wide, of lilac color,
    • pink satin ribbon 40 mm wide,
    • ribbon of satin lilac shade not less than 50 mm wide,
    • lighter.

    Consciousness of the flower from the tape for rezinochki with step by step photos

    • From a tape of lilac color 5 cm wide should prepare squares with sides of 50 mm, in the amount of 18 pieces.
    • From the pink ribbon you need to make squares with a side of 4 cm. Such details will require 12 pieces.
    • From the narrowest of the prepared tapes you need to make 11 parts.
    • Now you can start creating petals from all kinds of prepared squares. Taking one square, it must be neatly folded into a triangle, bending the part along its diagonal.
    • Positioning the fold of the fold horizontally to yourself, you need to tuck one edge to the middle and squeeze with your finger.
    • Then you need to repeat the action, but with the second side of the bend.
    • It turned out a square billet, the two sides of which consist of connected cuts. They should be carefully singed with fire so that each layer of the tape is processed and soldered together.
    • Carefully repeating each step, it is necessary to process the remaining large lilac squares.
    • Then repeat processing with pink details, getting the details a little smaller.
    • Special care must be taken when processing the smallest squares of lilac ribbon. It is important to ensure that the tape is not deformed and not lost, and the edge remains even.
    • Now you can combine the details in the decoration. First you need to put together large parts. It is necessary to glue, putting them one on another, slightly hiding the scorched cut under the bend strip.
    • Gradually adding petals, it is necessary to form a circle and fasten the first tier of the decoration with the last detail. The result will be a circle of 18 large lilac petals.
    • Then you need to make a circle of pink details of medium size. They should also be glued together as lilac petals. The result is a circle of 12 parts.
    • And there remain only small details, from which it is required to make the same circle, but already from 11 petals.
    • Now you need to join together all the prepared circles. It should start with the biggest, gradually moving to the smaller. First, you need to glue a large lilac circle and pink, combining their centers.
    • Then you need to attach a small lilac circle, placing it strictly in the center of the pink circle.
    • On the underside of the circles, you need to attach a small circle of felt that will hide the intersection of the circles and their details.
    • In the center of the attached mug, you should attach the prepared hair tie.
    • It remains to add a lilac-colored cabochon on the front side of the adornment and correct the folds of the petals.

    The decoration is ready and now you know how to make a flower from a satin ribbon! You can watch the video.

    Read my tips on what else can make ribbons with your own hands.

    Give each other gifts on the day of the holiday and just for no reason.

    Sincerely, Natalia Krasnova.

    Jack Thread (Halloween): Step by Step Guide

    Many girls have seen the cartoon "Nightmare before Christmas." The main hero of this picture is Jack.

    In the manufacture of gum "Jack" girl uses these materials:

    • standard thin rubber band for hair,
    • cosmetic pens (for face),
    • other necessary fixtures.

    When creating a jack jack, a woman performs the following actions:

    • attaches to the hair accessories and ribbon bows,
    • then he makes Jack's face — a circle of cloth that the girl stuffs with a padding polyester and paints — and the gum “Jack” is ready!

    Rubber thread "Hare ears" of beads, felts, beads

    For the manufacture of gum "Bunny ears" girl makes the pattern:

    • picks up a base for rubber,
    • tying the ears with a knot around the base - and the “Bunny ears” rubber is ready! A girl with such an elastic band on her head looks springy femininely cute.

    Photos of other rezinochek own hands

    In addition to the above homemade products, girls with their own hands make the following rubber bands:

    Gum-bow looks very attractive and gives the girl romance

    Also many funny rezinochek can be made of felt - such products also adorn girls.

    As a result, each woman can independently make one or another hair tie - to accomplish a creative feat and significantly transform her appearance.

    All materials are provided for review. Before using recommendations concerning the health of your hair, we recommend that you consult with a specialist. Use of material is permitted only with the active hyperlink to the site.

    Do-it-yourself gum made of satin ribbons - how to make a beautifully beautiful kanzashi decoration with a photo

    Modern needlewomen make such skilful jewelery that they can only wonder. They are able to make jewelry for the hair, which will emphasize the beauty of hair, in several different techniques. Satin ribbons for rubber bands are considered to be a convenient material, because it is possible to create from them from a flower to a decoration for a bunch using simple techniques.

    Craftswomen are able to do rezinochki their own hands from ribbons in several techniques, which, when carefully considered, become quite simple. The main thing in this business is to learn basic skills, follow the schemes and master classes and apply your imagination to make a beautiful decoration, distinguished by individuality and spectacular appearance.

    The basis of the manufacture of rubber bands is the technique of weaving, folding and gathering elements into one large pattern. For beginners it is better to take the basic skills as a basis, learn them, and then begin to complicate them.

    Even simple rezinochki can look spectacular on the girl's hair, if they skillfully decorate. Embroidery, weaving, beads, beads, sequins are the decoration options for finished products.

    You can try a variety of decoration options to make beautiful decorations.

    Materials for making rezinochek are satin ribbons of different colors and shades, beads, beads, decor elements.

    From auxiliary tools you will need glue for textiles, scissors, glue gun, a source of fire (a candle lighter) and skillful hands. Sometimes craftswomen take ready rezinochku, bought in a regular store, and decorate it in their own way.

    In this case, you will need a base where the elements will be fixed - cardboard, metal hairpins, plastic crabs.

    Japanese kanzashi art is considered a well-known technique of creating gum from satin ribbons. To make a beautiful children's accessory for hair resembling dahlia or chamomile, girls need to follow a master class:

    1. Make 16 square patches of 5 * 5 cm in size from a satin or silk cut, hold a lighter along the edges so that the threads do not come out. Repeat for a different color (inner petals).
    2. For the outer row of petals, each square should be bent diagonally, repeat, cast a corner with fire. For the inner row of petals squares are bent diagonally three times.
    3. Fold the smaller billet inside large, glue.
    4. Make 12 single-layer blanks for additional decoration.
    5. From thick cardboard cut 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over the fabric.
    6. Each double-layer petal is glued to a large base in a circle. Repeat for the second tier. To a smaller base stick single-layer petals. Glue 2 bases together.
    7. Decorate with beads, glue the resulting flower on a hairpin or crab.

    Hair bands made of ribbons of different widths

    Spectacular and voluminous obtained gum from satin ribbons with their own hands, made of a material of different widths. There is a master class for making an accessory:

    1. Cut a rectangular blank of cardboard 9 * 16 cm, draw a horizontal line in the middle. To wind a ribbon on it.
    2. Remove the coil without damaging the coils, sew the middle, pull off to the formation of a bow.
    3. Repeat the technology for the manufacture of a bow of a different material and a narrower tape.
    4. From a fabric of a contrasting color, cut pieces of the same length and width as the resulting bow, sing the edges.
    5. Collect all the items on the thread.
    6. Cut a cardboard circle, covered with a cloth, sew to rubber band.
    7. To glue a bow on a circle with a glue gun, decorate with small beads, rhinestones, buttons or pebbles.

    For the manufacture of gum from satin ribbons with their own hands, decorating the bun-bundle, girls will need to follow the step by step instructions

    1. 6 pieces of green ribbon 4 * 2.5 cm incise the dome, singed from 2 sides to create a wave - it will be leaves. Bend the bottom edge in two places, glue in the center to obtain a concave flat part.
    2. 12 pieces of white tape 4 * 2.5 cm and 5 pieces of 3.5 * 2.5 cm cut in a semicircle, scorch, glue into a droplet.
    3. Glue 5 blanks together by overlapping each other, decorate with stamens.
    4. Repeat for 14 pink petals of pieces 4.5 * 2.5 cm.
    5. Round the first layer of white parts, glue the remaining petals, make the second layer around the circle of pink elements. Glue the leaves.
    6. Make 5 such blanks.
    7. 4 pink pieces 10 * 5 bend in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
    8. 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm fasten with an overlay of white on a pink layer, form a fold, decorate the bottom with beads. Glue the bow, disguised middle.
    9. Behind the Bantu and flowers, glue the felt circles with a diameter of 3.5 and 2.5 cm, sew all the elements on the stitched lace elastic. Decorate the bun.

    Ribbon bands with bows

    Effectively on the hair look in the form of bows, which can be made by following the instructions:

    1. Take 2 ribbons 2.5 and 0.8 cm wide, 1 meter long, 1 ribbon 8 mm wide and 50 cm long.
    2. Make 2 cardboard templates in the form of a letter P of 6 and 8 cm in size, cut the edge of the wide ribbon along the slant, lay in a large pattern so that the cut and 2 folds are from each edge.
    3. Fasten the ribbon in the center with pins, sew a “forward needle” with a seam, assemble, fix.
    4. Repeat for the second bow, sew together, attach the bead in the middle.

    Get acquainted with the master classes, how to make crafts of ribbons do it yourself for beginners.

    Beginners skilled workers can try to make gum from satin ribbons, repeating the master classes.

    For convenience, there are instructions with photos and descriptions, as well as video materials, which clearly demonstrate the tricks of making jewelry.

    Following the instructions, you will receive interesting hair accessories that you can wear yourself in any hairstyle (braids, buns, tails) or use as a gift.

    How to make a gum of three ribbons

    All the girls who have a curly length more than the "haircut under the boy," more often or less often like to go with hairstyles, and here you can not do without rubber bands.

    Of course, in the arsenal of each lady there are not a dozen of such hair ornaments, but sometimes you want something original and unusual, which is why the question arises how to make hair bands with your own hands.

    Some interesting ideas you will find in this article.

    What to do gum for hair?

    The beauty of this idea is that in order to make a hair tie with your own hands, you can use any available materials without any restrictions:

    • fabrics - leather, felt, satin, cotton, and segments of any size, because you don’t need much for such a decoration and you can sew it not from one but from several patches,
    • thin, inexpensive, purchased rubber bands or wire,
    • beads, stones, a hem and everything else you can think of for decoration;
    • plastic.

    Of course, the tools and materials needed will also be needed to hold all this together into one whole:

    • thread,
    • needles
    • scissors,
    • metal small clamps and rivets,
    • wire,
    • glue.

    “Flower Astra”

    To make such a hair tie, a thin fabric of any shade is suitable. The manufacturing process is very simple:

    1. Cut a strip 5 cm wide, up to 10-20 cm long (depending on how lush you want to make a flower).
    2. On one side, cut along the entire length of the strip on the fringe principle - these will be petals.
    3. Take a needle and thread and collect the entire strip on the thread from the side where there are no cuts.
    4. Tighten it so that it turns out a circle with petals from the outside.
    5. Tie a thread and sew the edges of the fabric.
    6. In the center you can insert another such strip of this or any other color, or decorate with a bead of a suitable size.
    7. On the reverse side attach to the flower a thin elastic band, which you will tie strands with. For this purpose, suitable rivets or a small piece of cloth.

    Important! As you can see there is nothing complicated. Regarding the color - choose for yourself, but note that for the blondes pale blue or pale pink is perfect, and brunettes can take a more saturated green or chocolate.

    The easiest velvet elastic with their own hands

    A wide velvet elastic band always looks very luxurious, and to make it easier than ever:

    1. Take 1 or 2 pieces of velvet fabric of any color. If you took 2 pieces, cut out 2 of them of equal size rectangular parts and sew.
    2. The width of the rectangles is the width of the decoration, the larger it is, the more magnificent the decoration will be, the length - 25-40 cm so that you can arrange beautiful assemblies.
    3. Inside, thread a sturdy, elastic rubber thread that will gather the fabric in waves and keep a bunch of curls well together, and tie it.
    4. Sew a hole.
    5. Spread the decoration.

    Important! This option is perfect for everyday wear. If you make the decoration itself less lush and wide, you can additionally decorate it, for example, with a bow.

    To do this, after the base has been sewn, cut a rectangle of velvet, felt or leather. The length of the rectangle is the length of the bow.

    Assemble the part in the center to form folds in both directions and fasten it with a rivet to the gum.

    “Flower of satin ribbons”

    Such decoration is more suitable for girls and will be a wonderful gift or accessory for a holiday. To understand how to make such a hair tie with your own hands, read the instructions below:

    1. Take a pink satin ribbon 2.5 cm wide and with a ruler and burner decorate 5 strips 7 cm long.
    2. Do the same with a 5 cm wide purple hue ribbon, but the length of the strips should be 10 cm.
    3. Roll the ribbons of the same color in half and successively sweep all the details onto one thread and tighten so that a circle is formed (do it on the side where the edges of the tape are connected). So we get one circle of petals.
    4. Do the same with ribbons of the second color.
    5. Glue one flower to another, and in the middle - a button.
    6. On the back of the flower, glue a clip or rubber band that will hold the bundle of strands well.

    Elastic plastic

    This version of homemade decoration for your hair will be a real find for fashionistas, because you can infinitely show your imagination and make a new model every day. For this:

    1. Take a piece of plastic.
    2. Cut a rectangular part from it and draw any pattern.
    3. To fix the paint, cover the top with a clear lacquer - it is also possible for nails. If you want to make the decoration more elegant, even a varnish with sparkles is perfect.
    4. Wait until it dries, and then glue the elastic to the plastic on the back side, into which you will collect your curls.

    Important! If you have time and desire to tinker a little longer, you can cut the plastic itself not with a rectangle, but in the form of a specific shape - a hare, a cat, a flower, etc.

    Stylish gum

    Jewelry made of leather looks very solid and stylish when the elastic band covers a bunch of hair in several circles. If you just take a strip of leather, it will slide off, while delivering constant inconvenience. Therefore, we offer a leather variant that will definitely look extraordinary and firmly hold curls in a bundle:

    1. Take a strip of leather - a length of at least 30 cm.
    2. Cut the edges “along the oblique”.
    3. Mark the center of the strip; fasten the usual thin hair tie in this place with a rivet.

    Important! To collect hair, fasten the bundle with a thin elastic band, and wrap a leather strip around the bundle on top, tie it with a knot. This jewelry will look very original and unusual.

    Now you know how to make a hair tie with your own hands. Start with the simplest option, try your design possibilities, and then show your imagination, perfecting the decor. Surely, after a few samples, you will want to create more interesting and unusual jewelry to create different hairstyles!

    Simple lace rubber thread

    In the manufacture of rubber threads with lace woman performs the same procedure as when creating the basis for rubber band. However, in this situation there is one difference: after stitching, the girl does not turn out the blank.

    As a result, lace gum gives the girl a little playfulness.

    Multi-layer ribbon bow

    Ready-made multi-layer bow, made by hand, is no different from its counterpart shopkeeper. But, creating it at home, you can not limit yourself in choosing colors, ornament and material itself.

    To create such a bow variation you will need:

    • trimming your chosen tape, namely 5 pieces, as shown in the photo,
    • a hairpin or elastic band that will attach the product to the hair,
    • thread with a needle,
    • glue.

    The first step is to to makeblanks. It is necessary to bend each of the three ribbons of the same length, which were prepared earlier, so that their edges converge in the center, and sew, as shown in the photo.

    Two of the three finished petals are connected to each other by squeezing their centers with a thread. Thus, it turns out a simple four-petal bow.

    The longest ribbon should be wrapped so that a bow is formed with two loops and two tails. It should be tightly fastened with threads in the middle.

    As a result, you should have three blanks: from two loops, from four petals and a bow with tails.

    All of them are fastened together in the listed order with the help of threads and glue for reliability.

    To hide the middle stitched thread, the last and shortest shred is used. They just wrapped around the middle of the bow around, and behind the ends of the ribbon sit on the glue.

    It remains only to attach with a glue on the back of the product a hairpin, let it dry and wear with pleasure.

    Creation technology shown in the video:

    Editorial Board

    If you want to improve the condition of your hair, special attention should be paid to shampoos that you use.

    A frightening figure - in 97% of shampoos of famous brands are substances that poison our body. The main components, due to which all the troubles on the labels are designated as sodium lauryl sulfate, sodium laureth sulfate, coco sulfate. These chemicals destroy the structure of the hair, the hair becomes brittle, lose elasticity and strength, the color fades. But the worst thing is that this stuff gets into the liver, heart, lungs, accumulates in the organs and can cause cancer.

    We advise you to abandon the use of funds in which these substances are located. Recently, experts of our editorial staff conducted an analysis of sulfate-free shampoos, where the first place was taken by funds from the company Mulsan Cosmetic. The only manufacturer of all-natural cosmetics. All products are manufactured under strict quality control and certification systems.

    We recommend to visit the official online store mulsan.ru. If you doubt the naturalness of your cosmetics, check the expiration date, it should not exceed one year of storage.

    Spectacular two-color bow

    To create such bows for hair will require:

    • Satin ribbon of average thickness of one color
    • thin satin ribbon of a different color
    • very thin stripes of either color,
    • thread.

    When creating bows, it is not necessary to stick to the colors and materials described here. After all, you create a masterpiece with your own hands, so you should choose the style too.

    From the widest ribbon should get trilayer base. To do this, you need to decide on its diameter and begin to evenly wind the tape, so that you get three full turns. Then fasten the middle thread. More clearly presented below.

    Then you need to go to create top bow. It will consist of two layers, one on another. We fasten the ends of the ribbons in the middle and tie the two tiers together so that they do not break up.

    The finished bows of this type will include three elements: a three-layer base, a two-tier model and two pieces of the thinnest tape that will hang down.

    It remains only to put them on each other and tightly tie up with a ribbon in the middle.

    The finished decoration can be hooked on the head with the help of studs or invisibles, and the people around you will never guess that it was made with their own hands.

    Another option to create the original bow:

    This article was posted: 24 comments

    January 6, 2016 | 12:20

    I looked at your rezinochki, but wow and did not pick up. Yes, yes it is currently, because my hair is long. What can there be for men?

    January 6, 2016 | 13:42

    Eh, I'm not strong in men's elastic bands. They are usually made out of the most minimalistic variations - silicone ones, for example.

    January 6, 2016 | 21:19

    Good and nice rezinochki. I also make the gum myself: from a beautiful fabric, with beads and knitted. An exciting lesson :)

    January 6, 2016 | 22:18

    I understand you very much, Eugene)) Thank you!

    January 6, 2016 | 23:29

    I have long hair for my daughter and she often loves to pin them up with rubber bands, great homemade options. Merry Christmas!

    January 7, 2016 | 09:31

    Thanks love! And Merry Christmas to you!

    January 7, 2016 | 02:51

    The occupation is really exciting. If you have someone, you need to learn. Thank you, Nastya.

    January 7, 2016 | 09:29

    January 7, 2016 | 16:46

    Bunny's rezinochki just wonderful and bunny ears I also liked. I want to make as a gift.

    January 7, 2016 | 19:31

    I think the owner will be very happy

    January 7, 2016 | 17:01

    Very cute))) Especially inspired rezinochka "Jack"))). and bunnies - cuties))) Merry Christmas, Nastya!

    January 7, 2016 | 19:33

    And merry Christmas to you)) I will be glad to see the fruits of inspiration in the future

    February 11, 2016 | 14:13

    The class. It is much more interesting to make such rezinochki most, than to buy. The child is very interesting to do something with their own hands)))) Thanks for the ideas.

    February 11, 2016 | 21:19

    Not at all, Elena))

    March 16, 2016 | 00:02

    Very good rezinochki. I love creative people, they always have it all going and going well. And what masterpieces come out from under their magical hands. Doo may be and tell me on the blog about the work of their daughters. So temochka was born.

    March 16, 2016 | 08:06

    Thank you, Galina! Such posts (about their crafts and not only) are very inspiring)

    June 28, 2016 | 01:30

    Hello Anastasia. I learned to like your gum, they are very beautiful. Recently I sewed my daughter and myself, it turned out very beautifully. Thank you for your ideas. Now I will often read your sites.

    June 28, 2016 | 10:01

    Greetings Thank you very much for such a sincere response. I would be glad to see you here.

    February 13, 2017 | 17:04

    just lovely))) I really liked your needlework. My princess’s braids also grew, she loves a lot of rezinochek, but the usual gum and glued middle are unreal, so we decided to create our own collection. To you a question than to stick the middle. just hot melt glue? and just a gun for him ?? Thank you

    February 13, 2017 | 18:30

    Very happy) You can use the traditional "Moment" (if it is not rhinestones, of course, any silicone is better for them anyway)

    Gum from satin ribbons do it yourself: master class with photo and video

    Modern needlewomen make such skilful jewelery that they can only wonder. They are able to make jewelry for the hair, which will emphasize the beauty of hair, in several different techniques. Satin ribbons for rubber bands are considered to be a convenient material, because it is possible to create from them from a flower to a decoration for a bunch using simple techniques.

    How to make rezinochki of satin ribbons

    Craftswomen are able to do rezinochki their own hands from ribbons in several techniques, which, when carefully considered, become quite simple. The main thing in this business is to learn basic skills, follow the schemes and master classes and apply your imagination to make a beautiful decoration, distinguished by individuality and spectacular appearance.

    The basis of the manufacture of rubber bands is the technique of weaving, folding and gathering elements into one large pattern. For beginners it is better to take the basic skills as a basis, learn them, and then begin to complicate them. Even simple rezinochki can look spectacular on the girl's hair, if they skillfully decorate. Embroidery, weaving, beads, beads, sequins are the decoration options for finished products. You can try a variety of decoration options to make beautiful decorations.

    Materials for making rezinochek are satin ribbons of different colors and shades, beads, beads, decor elements. From auxiliary tools you will need glue for textiles, scissors, glue gun, a source of fire (a candle lighter) and skillful hands. Sometimes craftswomen take ready rezinochku, bought in a regular store, and decorate it in their own way. In this case, you will need a base where the elements will be fixed - cardboard, metal hairpins, plastic crabs.

    Kanzashi bands of rubber bands

    Japanese kanzashi art is considered a well-known technique of creating gum from satin ribbons. To make a beautiful children's accessory for hair resembling dahlia or chamomile, girls need to follow a master class:

    1. Make 16 square patches of 5 * 5 cm in size from a satin or silk cut, hold a lighter along the edges so that the threads do not come out. Repeat for a different color (inner petals).
    2. For the outer row of petals, each square should be bent diagonally, repeat, cast a corner with fire. For the inner row of petals squares are bent diagonally three times.
    3. Fold the smaller billet inside large, glue.
    4. Make 12 single-layer blanks for additional decoration.
    5. From thick cardboard cut 2 circles with a diameter of 3.5 cm and 2.5 cm, glue over the fabric.
    6. Each double-layer petal is glued to a large base in a circle. Repeat for the second tier. To a smaller base stick single-layer petals. Glue 2 bases together.
    7. Decorate with beads, glue the resulting flower on a hairpin or crab.

    Gum on a bunch of satin ribbons

    For the manufacture of gum from satin ribbons with their own hands, decorating the bun-bundle, girls will need to follow the step by step instructions

    1. 6 pieces of green ribbon 4 * 2.5 cm incise the dome, singed from 2 sides to create a wave - it will be leaves. Bend the bottom edge in two places, glue in the center to obtain a concave flat part.
    2. 12 pieces of white tape 4 * 2.5 cm and 5 pieces of 3.5 * 2.5 cm cut in a semicircle, scorch, glue into a droplet.
    3. Glue 5 blanks together by overlapping each other, decorate with stamens.
    4. Repeat for 14 pink petals of pieces 4.5 * 2.5 cm.
    5. Round the first layer of white parts, glue the remaining petals, make the second layer around the circle of pink elements. Glue the leaves.
    6. Make 5 such blanks.
    7. 4 pink pieces 10 * 5 bend in half, glue the ends with a fold, connect with a bow. Repeat for 2 white blanks 9 * 5 cm.
    8. 2 white ribbons 8.5 * 5 cm and pink 9 * 5 cm fasten with an overlay of white on a pink layer, form a fold, decorate the bottom with beads. Glue the bow, disguised middle.
    9. Behind the Bantu and flowers, glue the felt circles with a diameter of 3.5 and 2.5 cm, sew all the elements on the stitched lace elastic. Decorate the bun.

    Video: do-it-yourself satin ribbon

    Beginners skilled workers can try to make gum from satin ribbons, repeating the master classes. For convenience, there are instructions with photos and descriptions, as well as video materials, which clearly demonstrate the tricks of making jewelry. Following the instructions, you will receive interesting hair accessories that you can wear yourself in any hairstyle (braids, buns, tails) or use as a gift.

    Watch the video: DIY SCRUNCHIES 3 Methods - no sew & sew. JENerationDIY (December 2019).

    Loading...